-
2,2′-dimorpholinyldiethyl ether Cas#6425-39-4 DMDEE
Description MOFAN DMDEE is a tertiary amine catalyst for the production of polyurethane foam, especially suitable for the manufacturing of polyester polyurethane foams or for the preparation of one component foams (OCF) Application MOFAN DMDEE is used in polyurethane(PU) injection grouting for waterproof, one component foams,Polyurethane (PU) foam sealants,polyester polyurethane foams etc. Typical Properties Appearance Flash Point, °C (PMCC) 156.5 Viscosity @ 20 °C cst 216.6 Sp... -
Quaternary ammonium salt solution for rigid foam
Description MOFAN TMR-2 is a tertiary amine catalyst used to promote polyisocyanurate reaction (trimerization reaction),Provides a uniform and controlled rise profile compared to potassium based catalysts. Used in rigid foam applications where improved flowability is required. MOFAN TMR-2 can also be used in flexible molded foam applications for back-end cure. Application MOFAN TMR-2 is used for refrigerator,freezer,polyurethane continuous panel ,pipe insulation etc. Typical Properties ... -
![N’-[3-(dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine Cas# 6711-48-4](https://cdn.globalso.com/mofanpu/MOFANCAT-15A.jpg)
N’-[3-(dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine Cas# 6711-48-4
Description MOFANCAT 15A is a non-emissive balanced amine catalyst. Due to its reactive hydrogen, it readily reacts into the polymer matrix. It has a slight selectivity towards the urea (isocyanate-water) reaction. Improves the surface cure in flexible molded systems.It is mainly used as a low-odor reactive catalyst with active hydrogen group for polyurethane foam. It can be used in rigid polyurethane systems where a smooth reaction profile is required. Promotes the surface cure/ reduces skin... -
2-((2-(dimethylamino)ethyl)methylamino)-ethanol Cas# 2122-32-0(TMAEEA)
Description MOFANCAT T is a non-emission reactive catalyst with hydroxylgroup. It promotes the urea (isocyanate – water) reaction. Due to its reactive hydroxyl group it readily reacts into the polymer matrix. Provides smooth reaction profile. Possesses low fogging and low PVC staining property. It can be used in flexible and rigid polyurethane systems where a smooth reaction profile is required. Application MOFANCAT T is used for spray foam insulation, flexible slabstock, packaging foam... -
N,N-Dimethylbenzylamine Cas#103-83-3
Description MOFAN BDMA is a benzyl dimethylamine. It is widely used in chemical fields,eg. polyurethane catatlyst, crop pretection, coating, dyestuffs, fungicides, herbicides, insecticides, pharmaceutical agents, textile dyestuffs, textile dyestuffs etc. When MOFAN BDMA is used as polyurethane catalyst. It has the function of improving the adhesion of the foam surface. It is also used for flexible slabstock foam applications. Application MOFAN BDMA is used for refrigerator, freez... -
![N-[3-(dimethylamino)propyl]-N, N’, N’-trimethyl-1, 3-propanediamine Cas#3855-32-1](https://cdn.globalso.com/mofanpu/MOFAN-77.jpg)
N-[3-(dimethylamino)propyl]-N, N’, N’-trimethyl-1, 3-propanediamine Cas#3855-32-1
Description MOFAN 77 is a tertiary amine catalyst that can balance the reaction of urethane (polyol-isocyanate) and urea (isocyanate-water) in various flexible and rigid polyurethane foams; MOFAN 77 can improve the opening of flexible foam and reduce the brittleness and adhesion of rigid foam; MOFAN 77 is mainly used in the production of car seats and pillows, rigid polyether block foam. Application MOFAN 77 is used for automative interiors, seat, cell open rigid foam etc. Typical Properti... -
![1,8-diazabicyclo[5.4.0]undec-7-ene Cas# 6674-22-2 DBU](https://cdn.globalso.com/mofanpu/MOFAN-DBU.jpg)
1,8-diazabicyclo[5.4.0]undec-7-ene Cas# 6674-22-2 DBU
Description MOFAN DBU a tertiary amine that strongly promotes the urethane (polyol-isocyanate) reaction in semi-flexible microcellular foam, and in coating, adhesive, sealant and elastomer applications. It displays very strong gelation capability, imparts low odor and is used in formulations containing aliphatic isocyanates as they require exceptionally strong catalysts because they are much less active than aromatic isocyanates. Application MOFAN DBU is in semi-flexible microcellu... -
N-Methyldicyclohexylamine Cas#7560-83-0
Description MOFAN 12 acts as a co-catalyst to improve cure. It is n-methyldicyclohexylamine suitable for rigid foam applications. Application MOFAN 12 is used for polyurethane block foam. Typical Properties Density 0.912 g/mL at 25 °C(lit.) Refractive index n20/D 1.49(lit.) Fire point 231 °F Boiling Point/Range 265°C / 509°F Flash Point 110°C / 230°F Appearance liquid Commercial specification Purity, % 99 min. Water content, % 0.5 max. Package 170 kg / drum or accord... -
N,N-Dimethylcyclohexylamine Cas#98-94-2
MOFAN 8 is low viscosity Amine catalyst, Acts as a widely used catalyst. Applications of MOFAN 8 include all types of rigid packaging foam.
-
bis(2-Dimethylaminoethyl)ether Cas#3033-62-3 BDMAEE
Description MOFAN A-99 is widely used in flexible polyether slabstock and moulded foams using TDI or MDI formulations. It can be used alone or with other amine catalyst to balance the blowing and gelation reactions.MOFAN A-99 gives rapid cream time and is recommended for use in partially water-blow rigid spray foams.It is a power catalyst for the isocyanate-water reaction and has applications in certain moisture-cured coatings,caukls and adhesives Application MOFAN A-99, BDMAEE primarly prom... -
70% Bis-(2-dimethylaminoethyl)ether in DPG MOFAN A1
Description MOFAN A1 is a tertiary amine which has a strong influence on the urea (water-isocyanate) reaction in flexible and rigid polyurethane foams. It consists of 70% bis(2-Dimethylaminoethyl) ether diluted with 30% dipropylene glycol. Application MOFAN A1 catalyst can be used in all types of foam formulations. The strong catalytic effect on the blowing reaction can be balanced by the addition of a strong gelling catalyst. If amine emissions are a concern, low emission alternatives are av... -
Pentamethyldiethylenetriamine (PMDETA) Cas#3030-47-5
Description MOFAN 5 is high active polyurethane catalyst, mainly used in the fasting, foaming, balance the overall foaming and gel reaction. It is widely used in the polyurethane rigid foam including PIR panel. Because of strong foaming effect, it can improve the foam liquidity and product process, compatible with DMCHA. MOFAN 5 also can compatible with other catalyst except polyurethane catalyst. Application MOFAN5 is refrigerator, PIR laminate boardstock, spray foam etc. MOFAN 5 can also be...
