MOFAN

Products

  • N,N-Dimethylcyclohexylamine Cas#98-94-2

    N,N-Dimethylcyclohexylamine Cas#98-94-2

    MOFAN 8 is low viscosity Amine catalyst, Acts as a widely used catalyst. Applications of MOFAN 8 include all types of rigid packaging foam.

  • bis(2-Dimethylaminoethyl)ether Cas#3033-62-3 BDMAEE

    bis(2-Dimethylaminoethyl)ether Cas#3033-62-3 BDMAEE

    Description MOFAN A-99 is widely used in flexible polyether slabstock and moulded foams using TDI or MDI formulations. It can be used alone or with other amine catalyst to balance the blowing and gelation reactions.MOFAN A-99  gives rapid cream time and is recommended for use in partially water-blow rigid spray foams.It is a power catalyst for the isocyanate-water reaction and has applications in certain moisture-cured coatings,caukls and adhesives Application MOFAN A-99, BDMAEE primarly prom...
  • 70% Bis-(2-dimethylaminoethyl)ether in DPG  MOFAN A1

    70% Bis-(2-dimethylaminoethyl)ether in DPG MOFAN A1

    Description MOFAN A1 is a tertiary amine which has a strong influence on the urea (water-isocyanate) reaction in flexible and rigid polyurethane foams. It consists of 70% bis(2-Dimethylaminoethyl) ether diluted with 30% dipropylene glycol. Application MOFAN A1 catalyst can be used in all types of foam formulations. The strong catalytic effect on the blowing reaction can be balanced by the addition of a strong gelling catalyst. If amine emissions are a concern, low emission alternatives are av...
  • Pentamethyldiethylenetriamine (PMDETA) Cas#3030-47-5

    Pentamethyldiethylenetriamine (PMDETA) Cas#3030-47-5

    Description MOFAN 5 is high active polyurethane catalyst, mainly used in the fasting, foaming, balance the overall foaming and gel reaction. It is widely used in the polyurethane rigid foam including PIR panel. Because of strong foaming effect, it can improve the foam liquidity and product process, compatible with DMCHA. MOFAN 5 also can compatible with other catalyst except polyurethane catalyst. Application MOFAN5 is refrigerator, PIR laminate boardstock, spray foam etc. MOFAN 5 can also be...
  • Triethylenediamine Cas#280-57-9 TEDA

    Triethylenediamine Cas#280-57-9 TEDA

    Description TEDA Crystalline catalyst is used in all types of polyurethane foams including flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is also used in polyurethane coatings applications.TEDA Crystalline catalyst accelerates the reactions between the isocyanate and water, as well as between the isocyanate and organic hydroxyl groups. Application MOFAN TEDA is used in flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is also used in ...
  • Solution of 33%triethylenediamice, MOFAN 33LV

    Solution of 33%triethylenediamice, MOFAN 33LV

    Description MOFAN 33LV catalyst  is a strong urethane reaction (gelation) catalyst for multipurpose use. It is 33% triethylenediamine and 67% dipropylene glycol. MOFAN 33LV has low-viscosity and is used in adhesive and sealant applications. Application MOFAN 33LV is used in flexible slabstock, flexible molded, rigid, semi-flexible and elastomeric. It is also used in polyurethane coatings applications. Typical Properties Color(APHA) Max.150 Density, 25℃ 1.13 Viscosity, 25℃, mPa.s 125...
  • N-(3-Dimethylaminopropyl)-N,N-diisopropanolamine Cas# 63469-23-8 DPA

    N-(3-Dimethylaminopropyl)-N,N-diisopropanolamine Cas# 63469-23-8 DPA

    Description MOFAN DPA is a blowing polyurethane catalyst based on N,N,N’-trimethylaminoethylethanolamine.  MOFAN DPA is suitable for use in producing molded flexible, semi-rigid, and rigid polyurethane foam. In addition to promoting the blowing reaction, MOFAN DPA also promotes the crosslinking reaction between isocyanate groups. Application MOFAN DPA is used in molded flexible, semi-rigid foam, rigid foam etc. Typical Properties Apperance,25℃ light yellow transparent liquid Vis...
  • 2,4,6-Tris(Dimethylaminomethyl)phenol Cas#90-72-2

    2,4,6-Tris(Dimethylaminomethyl)phenol Cas#90-72-2

    Description MOFAN TMR-30 catalyst is 2,4,6-Tris(Dimethylaminomethyl)phenol, delayed-action trimerization catalyst for polyurethane rigid foam, rigid polyisocyanurate foams and can be used in CASE applications.MOFAN TMR-30 is widely used for the production of rigid polyisocyanurate boardstock. It is typically used in combination with other standard amine catalysts. Application MOFAN TMR-30 is used for the production of PIR continuous panel, refrigerator, rigid polyisocyanurate boardstock, spra...
  • 1, 3, 5-tris [3-(dimethylamino) propyl] hexahydro-s-triazine Cas#15875-13-5

    1, 3, 5-tris [3-(dimethylamino) propyl] hexahydro-s-triazine Cas#15875-13-5

    Description MOFAN 41 is a moderately active trimerization catalyst. It offers very good blowing capability. It possesses very good performance in water co-blown rigid systems. It is used in a wide variety of rigid polyurethane and polyisocyanurate foam and non-foam applications. Application MOFAN 41 is used in PUR and PIR foam,eg. Refrigerator, freezer, continuous panel, discontinuous panel, block foam, spray foam etc. Typical Properties Appearance Colorless or Light yellow liquid vis...
  • Potassium acetate solution, MOFAN 2097

    Potassium acetate solution, MOFAN 2097

    Description MOFAN 2097 is a kind of trimerization catalyst compatible with other catalyst, widely used in pour rigid foam and spray rigid foam,with fast foaming and gel characteristic. Application MOFAN 2097 is refrigerator,PIR laminate boardstock,spray foam etc. Typical Properties Appearance Colorless clear liquid Specific gravity, 25℃ 1.23 Viscosity, 25℃, mPa.s 550 Flash point, PMCC, ℃ 124 Water solubility Soluble OH value mgKOH/g 740 Commerc...
  • Potassium 2-ethylhexanoate Solution, MOFAN K15

    Potassium 2-ethylhexanoate Solution, MOFAN K15

    Description MOFAN K15 is a solution of potassium-salt in diethylene glycol. It promotes the isocyanurate reaction and is used in a wide range of rigid foam applications. For better surface curing, improved adhesion and better flow alternatives, consider TMR-2 catalysts Application MOFAN K15 is PIR laminate boardstock, Polyurethane continuous panel, spray foam etc. Typical Properties Appearance Light yellow liquid Specific gravity, 25℃ 1.13 Viscosity, 25℃, mPa.s 7000Max. Flash point...
  • Dibutyltin dilaurate (DBTDL), MOFAN T-12

    Dibutyltin dilaurate (DBTDL), MOFAN T-12

    Description MOFAN T12 is a special catalyst for polyurethane. It is used as a high-efficiency catalyst in the production of polyurethane foam, coatings and adhesive sealants. It can be used in one-component moisture-curing polyurethane coatings, two-component coatings, adhesives and sealing layers. Application MOFAN T-12 is used for  laminate boardstock, Polyurethane continuous panel, spray foam, adhesive, sealant etc. Typical Properties Appearance Oliy l...

Leave Your Message