Quaternary ammonium salt solution for rigid foam
MOFAN TMR-2 is a tertiary amine catalyst used to promote polyisocyanurate reaction (trimerization reaction),Provides a uniform and controlled rise profile compared to potassium based catalysts. Used in rigid foam applications where improved flowability is required. MOFAN TMR-2 can also be used in flexible molded foam applications for back-end cure.
MOFAN TMR-2 is used for refrigerator,freezer,polyurethane continuous panel ,pipe insulation etc.
| Apparence | colorless liquid |
| Relative density (g/mL at 25 °C) | 1.07 |
| Viscosity (@25℃, mPa.s) | 190 |
| Flash Point(°C) | 121 |
| hydroxyl value (mgKOH/g) | 463 |
| Appearance | colorless or light yellow liquid |
| Total amine value (meq/g) | 2.76 Min. |
| Water content % | 2.2 Max. |
| Acid value (mgKOH/g) | 10 Max. |
200 kg / drum or according to customer needs.
H314: Causes severe skin burns and eye damage.
Pictograms
| Signal word | Warning |
| Not dangerous according to transport regulations. | |
Advice on safe handling
Use personal protective equipment.
Do not eat, drink or smoke during use.
Overheating of a quaternary amine for prolonged p eriods above 180 F (82.22 C) can cause product to degrade.
Emergency showers and eye wash stations should be readily accessible.
Adhere to work practice rules established by government regulations.
Use only in well-ventilated areas.
Avoid contact with eyes.
Avoid breathing vapors and/or aerosols.
Hygiene measures
Provide readily accessible eye wash stations and safety showers.
General protective measures
Discard contaminated leather articles.
Wash hands at the end of each workshift and before eating, smoking or using the toilet.
Storage Information
Do not store near acids.
Keep away from alkalis.
Keep containers tightly closed in a dry, cool and well-ventilated place.
![N-[3-(dimethylamino)propyl]-N, N’, N’-trimethyl-1, 3-propanediamine Cas#3855-32-1](https://cdn.globalso.com/mofanpu/MOFAN-77-300x300.jpg)
